Hostacom DYS707N HS NAT high melt flow, 975 MPa flexural modulus, high impact, natural thermoplastic elastomeric olefin (TEO) resin has an excellent combination of stiffness, impact resistance and processability. It is typically used for automotive interior trim applications that demand excellent cold temperature impact and requires higher shrinkage.
Hostacom DYS707N HS NAT
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 20 g/10 min |
| Density (23 °C) | 0.90 g/cm³ |
| Flexural Modulus | 975 MPa |
| Tensile Stress at Yield | 18 MPa |
| Charpy Impact Strength - Notched (23 °C) | 60 kJ/m² |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Interior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications